Kalispell Montana FSC Template Guide

(This page is a work in progress, come back weekly for more updates!)

Updating family history center (FHC) pages are done infrequently and can be time consuming. Styling them can be even more difficult, especially for those just learning how to edit. I have put together a set of templates that can help other contributors organize and style their own FHC pages with (hopefully) minimal effort. This page contains an exhaustive list of all the templates with descriptions their intended use and how to use them on your own FHC page.

For an example of a completed FHC page using the following templates, visit the Kalispell Montana Family History Center's page.

When used properly, all of these templates will adjust to the screen size of the current viewer. So people on phones can read everything just as well as someone visiting on a desktop computer.

In this guide I have the following sections:

• Tutorial section that takes you step by step through creating a complete example FHC page.
• Advanced Template Options section that shows you some of the advanced options for the templates. This section is in no particular order.
• Other Resources section that gives you links to some of the sources I used to create the templates, as well as a complete list of photos that I've already submitted to FamilySearch wiki.

Before You Start

• All edits must be done in the "Edit source" tab.
• It may be easier to print these instructions out before you start the tutorial. You will be bouncing between two different browser tabs once you begin if you do not print the tutorial. To print go to "File" in the top left side of your browser and click "Print" in the menu, or hit CMD + P or CTRL + P. This should bring up the print dialogue box that you are familiar with. NOTE: I provide lot's of examples of how the page should look as you go through the tutorial. The examples will not look the same when printed, so be careful when comparing what you see on your screen and the completed examples in the print version.
• These are templates, so I may make improvements on them. Do not be surprised if you see the boxes behaving or looking different.
• Plan out your pages - a little planning goes a long way. Figure out how you would like to organized the information by answering the following questions:
  • What information should stand out?
  • What information should be grouped together?
  • What levels of information do I have? Think sections and subsections. Create a hierarchy of information that makes sense to the information you have.

Tutorial

Here I will walk you through a simple tutorial where we create a page with a couple of announcements, two different lists of resources, and an article written about my FHC. This should give you a good idea of how to use the templates for creating your own FHC page. For reference, here is what you should have at the end of this tutorial.

A good place to practice without messing with your FHC page is to click on "Sandbox" up next to your name on any wiki page. This will take you to your own page where you can try things out and practice before you edit the real thing. I would recommend going through the following tutorial on your "Sandbox" page.

1. Decide what sections you need

Everything on a page should be organized into sections. Think of a section like a chapter in a book - its purpose is to group like content together. When you are planning out your page you may have one section or many sections depending on how much information you are displaying.

In our example we have a couple of announcements, two different lists of resources and an article written about my FHC. Let's make three sections, "Announcements" where all of the FHC announcements are located, "Resources" where you can find a list of various resources for doing research in my area, and "Articles" for the published articles about my FHC.

Of course, when you are planning out your FHC page, you may have different sections. Do what makes most sense for your FHC when deciding what sections to create.

2. Order your sections

Now that we have our sections, we need to put them in order from most important to least important. This will determine what order the sections show up on your page. For our example, I want "Articles" first because I want people to see the article written about my FHC, then "Announcements" because we have several events hosted at our FHC, and I want visitors to know what is going on, and finally "Resources" where people who are doing research in our area can go to to find local links.

3. Create your sections using Kalispell FHC Section template

Now we will use the "Kalispell FHC Section" template to create each of our sections. This template allows you to type in the name and the content for each of your sections and then takes care of all the formatting.

For now we are just going to create sections with titles and no content.

3A. Open up the page you would like to edit and click "Edit source" at the top. You will probably see a lot of text on the page. If you are planning on replacing everything, you can delete it all and start with a blank page.

3B. Figure out where on the page you would like to create your first section. If you just deleted everything, this will just be at the very top.

3C. Copy everything in the box below.

{{Kalispell FHC Section
| Section Title = 
| Section Content =
 
}}

3D. Go back to "Edit source" and paste everything you just copied into where you would like your first section.

3E. Where it says "Section Title" type in your title for your first section after the equals sign. Our first section is "Articles," so we will type that in after the equals sign next to "Section Title." Below is an example of what it should look like.

{{Kalispell FHC Section
| Section Title = Articles
| Section Content =
 
}}

3F. At the bottom of the "Edit Source" page click the button that says "Show Preview." This button allows you to see the changes you made without saving the page. You should see something similar to the section below. As you can see, each section has the title with an underline at the top, and a link "Back to Top" at the bottom. All of our content, that we will add in later, will end up between the title and the "Back to Top" link. If you don't see something like below, go to step 3G.

Articles

Back to top

3G. Notice the brackets at the beginning ({{) and end (}}) of the text in step 3C. These brackets are very important because they mark the beginning and end of the section. If you miss the brackets, then you will see a whole bunch of random text on the screen instead of the section, like below, instead of the section in step 3F.

{{Kalispell FHC Section | Section Title = | Section Content = }

3H. Repeat steps 2B through 2E with the rest of the sections. Below is an example of what it should look like once you've created our three sections: "Articles," "Announcements," and "Resources," in that order.

{{Kalispell FHC Section
| Section Title = Articles
| Section Content =
 
}}
{{Kalispell FHC Section
| Section Title = Announcements
| Section Content =
 
}}
{{Kalispell FHC Section
| Section Title = Resources
| Section Content =
 
}}

3I. After you have created all of your sections, hit the "Show preview" button again. It should look something like the example below.

Articles

Back to top

Announcements

Back to top

Resources

Back to top

3J. Click the "Save changes" button at the bottom of your "Edit source" page. Good work! You have successfully created 3 new sections on your wiki page! This stuff isn't easy, so take a second to give yourself a pat on the back :)

4. Add an article to the "Articles" section using Kalispell FHC Article template

Now that we have our sections, we can start adding our content to each of the sections. We are going to start with our first section "Articles" and add an article. I created light blue boxes for displaying articles. These boxes draw people's attention, but aren't too distracting. Each article lets you add a title, a subtitle, an image for the article, and content that is either the article itself or includes a description and a link to the article. For now we will add in everything but an image.

For our example we have one article we want to add. The text for the article is below for reference. Remember, for this step we will not be adding an image to the article.

Family History Highlight: April
Finding Your Roots

Need a break from your own family history? Or maybe some inspiration to get you going? This fun series by Ancestry on YouTube features 38 5-minute episodes featuring famous people's reaction to finding out about their ancestors.

Get inspired on YouTube. (the word YouTube will be a link to a YouTube video)

4A. Open up the page you would like to edit and click "Edit source" at the top.

Family History Highlight: April

Finding Your Roots

Need a break from your own family history? Or maybe some inspiration to get you going? This fun series by Ancestry on YouTube features 38 5-minute episodes featuring famous people's reaction to finding out about their ancestors.

Get inspired on YouTube.

Family History Highlight: April

Finding Your Roots

Need a break from your own family history? Or maybe some inspiration to get you going? This fun series by Ancestry on YouTube features 38 5-minute episodes featuring famous people's reaction to finding out about their ancestors.

Get inspired on YouTube.

This tutorial is unfinished. Below this title are my notes...

{{Kalispell FHC Section
| Section Title = Announcements
| Section Content = 

{{Kalispell FHC Announcement 
| Announcement Title = 2022 RootsTech videos available now!
| Announcement Content = 

"RootsTech welcomes millions of people worldwide to celebrate family at the world’s largest family history conference and year-long learning platform. With thousands of classes, inspiring speakers, meaningful activities and joyful connections, RootsTech brings the human family together like no other event."

''Rewatch this year's RootsTech videos now at [https://www.familysearch.org/rootstech rootstech.org].''

}}

{{Kalispell FHC Announcement 
| Announcement Title = Get your personal family history books digitized.
| Announcement Content = 
The Salt Lake Family History Library will be digitizing family history archives in the NW Montana History Museum (previously the Central School Museum) in Kalispell. If you have your own PERSONAL family history book and would like it digitized so that others are able to search it online at FamilySearch.org, please contact Diane Denney at 406-212-2176 or Debbie Russell at 760-703-5558.

''For questions or digitization requests go to the [https://www.fsrecordfinder.org/contact Family Search Record Finder Contact Page].''}}

{{Kalispell FHC Announcement 
| Announcement Title = Join the Ranks! Help digitize Flathead County records.
| Announcement Content = 
FamilySearch has provided volunteers and professional equipment to digitize Flathead County local records for FREE! No longer will these records need to languish on dusty shelves in our local repositories with their valuable nuggets of genealogical information forgotten and hidden. This project is HUGE, and FamilySearch’s volunteers are seeking to swell their ranks. They can use all the help they can get.

''Read more at [https://www.fsrecordfinder.org/ Family Search Record Finder].''}}

}}

Kalispell FHC Resources Template Kalispell FHC Announcement Template

Advanced Template Options

All Kalispell FHC Section options

Empty Section Template With All Available Fields

{{Kalispell FHC Section
| Section Title = 
| Style visibility = 
| Style background-color =
| Style align-items = 
| Style justify-content = 
| Section Content = 

}}

Section Template With All Available Fields Filled Out

{{Kalispell FHC Section
| Section Title = Center Resources
| Style visibility = visible
| Style background-color = #f4f4f4
| Style align-items = stretch
| Section Content = 

{{Kalispell FHC Announcement 
| Announcement Title = 2022 RootsTech videos available now!
| Announcement Content = 

"RootsTech welcomes millions of people worldwide to celebrate family at the world’s largest family history conference and year-long learning platform. With thousands of classes, inspiring speakers, meaningful activities and joyful connections, RootsTech brings the human family together like no other event."

''Rewatch this year's RootsTech videos now at [https://www.familysearch.org/rootstech rootstech.org].''

}}
}}

Center Resources

2022 RootsTech videos available now!

"RootsTech welcomes millions of people worldwide to celebrate family at the world’s largest family history conference and year-long learning platform. With thousands of classes, inspiring speakers, meaningful activities and joyful connections, RootsTech brings the human family together like no other event."

Rewatch this year's RootsTech videos now at rootstech.org.

Back to top

Other Sources

Here are some other sources that I used to create these templates.

• FamilySearch style guide. This is where I look up all of the official FamilySearch colors for the boxes.

• Free Image Collections. The Church of Jesus Christ of Latter-day Saints has curated a set of free, high-quality images that are great to use on the wiki. I have already uploaded a few (listed below).

• 

  File:Family history argentina.jpeg

• 

  File:Girls giggling GL.jpg

A family history conference hosted by FamilySearch. For online genealogical classes and videos see RootsTech.org.

To access available information, first log into FamilySearch.